Radiolink New Crossflight Flight Controller Parameter Connector: JST GH1.25 Connector PWM Output: 10 PWM Output Mavlink UART: 2(without CTSRTS) USB Port: 1(Type-C) GPS UART/I2C Port: 1 RC In Signal Input: PPM/SBUS RSSI Output: Do not support OSD Module: OSD Module Integrated ESC Protocol: PWM DSHOT Protocol: Do not support ONESHOT Protocol: Do not support Neopix Led: Support Gripper Function: Support RTK：Support USB Voltage: 5V±0.3V Servo Voltage: Not applicable Operating Temperature: -40~80℃ Adaptable Models: 3-8 copter/Airplane/Helicopter/Car/Boat Dimention: 39.7*39.7*13mm (1.56"*1.56"*0.51") Weight: 16.5g(0.58oz), 54g(1.9oz when all the connect wires included) Power Module Specifications: Input Voltage: 2-12S Input Current: 90A Output Voltage: 5.1V Output Current(BEC): 2.5A Input Current(connect to one ESC only): 20A Hardware Specification: Processor: HC32F4A0PITB Gyro: ICM42670 Compass: VCM5883 Barometer: LPS22HB FRAM: Without FRAM, use the internal flash to store parameters, 2617 waypoints for multi-copters, and 2623 waypoints for airplanes Note: * The crossflight can set parameters by Radiolink Mission Planner, ArduPilot Mission Planner, and QGC Mission Planner. * The crossflight only can upgrade the firmware by Radiolink Mission Planner, and only can upgrade the firmware from Radiolink. * You could download the Radiolink mission planner and firmware via our official website: https://radiolink.com/crossflight Package included: 1 * Radio link New Cross-flight Flight Controller WITH GPS M10N
